LMV321TP/LMV358TP/LMV324TP(3PEAK思瑞浦)
- LMV321TP/358TP/324TP are CMOS single, dual,and quad op-amps with low offset, stable highfrequency response, low power, low supply voltage,and rail-to-rail inputs and outputs. They incorporate3PEAKs proprietary and patented design techniques
- 咨询热线：19372204303
-
-
产品详情
-
联系我们
LMV321TP/358TP/324TP are CMOS single, dual,and quad op-amps with low offset, stable highfrequency response, low power, low supply voltage,and rail-to-rail inputs and outputs. They incorporate3PEAK’s proprietary and patented design techniquesto achieve best in-class performance e among allmicro-power CMOS amplifiers.The LMV321TP/358TP/324TP is unity-gain stableunder Any Capacitive Load with 1.27 MHz gainbandwidth product, 0.9 V/μs slew rate whileconsuming only 40 μA of supply current per amplifier.Beyond the rails input and rail-to-rail outputcharacteristics allow the full power-supply voltage tobe used for signal range.This combination of features makes the LMV321TP/358TP/324TP superior among rail-to-rail input/output CMOS op-amps in its power class. TheLMV321TP/358TP/324TP family is an ideal choice forbattery-powered applications because they minimizeerrors due to power supply voltage variations over thelifetime of the battery and maintain high CMRR evenfor a rail-to-rail input op-amp.
Features
Stable 1.27 MHz GBWP with Low IQ of Only 40μA Typical per Amplifier
0.9 V/μs Slew Rate
Offset Voltage: 3.5 mV Maximum
Offset Voltage Temperature Drift: 0.6 μV/°C
Input Bias Current: 1 pA Typical
Beyond the Rails Input Common-Mode Range
Outputs Swing to within 5 mV Typical of eachRail
No Phase Reversal for Overdriven Inputs
Single +2.1 V to +6.0 V Supply Voltage Range
−40°C to 125°C Operation Range
Applications
Active Filters, ASIC Input or Output Amplifier
Sensor Interface
Smoke/Gas/Environment Sensors
Portable Instruments and Mobile Device
Audio Output
Battery or Solar Powered Systems
Medical Equipment Piezo Electrical Transducer Amplifier
Features
Stable 1.27 MHz GBWP with Low IQ of Only 40μA Typical per Amplifier
0.9 V/μs Slew Rate
Offset Voltage: 3.5 mV Maximum
Offset Voltage Temperature Drift: 0.6 μV/°C
Input Bias Current: 1 pA Typical
Beyond the Rails Input Common-Mode Range
Outputs Swing to within 5 mV Typical of eachRail
No Phase Reversal for Overdriven Inputs
Single +2.1 V to +6.0 V Supply Voltage Range
−40°C to 125°C Operation Range
Applications
Active Filters, ASIC Input or Output Amplifier
Sensor Interface
Smoke/Gas/Environment Sensors
Portable Instruments and Mobile Device
Audio Output
Battery or Solar Powered Systems
Medical Equipment Piezo Electrical Transducer Amplifier
