TPT71044/TPT71050(3PEAK思瑞浦)
- The TPT710xx device is an isolated CAN transceiver thatmeets the ISO11898 High-speed CAN (Controller AreaNetwork) physical layer standard. The device is designedto be applied in CAN FD networks up to 5 Mbps and toenhance timing margin and h
- 咨询热线：19372204303
-
-
产品详情
-
联系我们
The TPT710xx device is an isolated CAN transceiver thatmeets the ISO11898 High-speed CAN (Controller AreaNetwork) physical layer standard. The device is designedto be applied in CAN FD networks up to 5 Mbps and toenhance timing margin and higher data rates in long andhigh-loading networks. As the design, the device featurescross-wire, overvoltage, and loss of ground protection from−42 V to +42 V, overtemperature shutdown, and a −30 Vto +30 V common-mode range. The VCCA is the powersupply input for RXD and TXD I/O pins which support awide range from 2.25 V to 5.5 V. The 2nd power supplyVCCB of CAN BUS side which supports the range from 4.5V to 5.5 V.The devices integrate high-performance digital isolatorswith 5000 VRMS (WSOP8, WSOP16 packages), 3750VRMS (SMP8 package), and isolation ratings per UL 1577.These devices are also to be certified by VDE, UL, CSA,and CQC.TPT710xx family is available in WSOP8, WSOP16, andSMP8 packages, and is characterized from −40°C to+125°C.
Features
• Meet ISO11898 Standard
• Support CAN FD and Data Rates up to 5 Mbps
• Typical Loop Delay: 110 ns• 5-V Power Supply, 2.25-V to 5.5-V IO Interface
• Receiver Common-Mode Input Voltage: ±30 V
• Bus Fault Protection: ±42 V
• Up to 5-kV RMS Isolation Rating (WSOP)
• ±200-kV/μs typ Static CMTI, ±150-kV/μs typ DynamicCMTI
• Junction Temperatures from −40°C to 150°C
• SMP8 and Wide-SOP (WSOP8, WSOP16)
• BUS pin ESD Protection (between Bus pins andGNDB)
– ±15-kV IEC 61000-4-2 Contact Discharge
• Safety-Related Certifications:
– VDE Certification according to DIN VDE V 0884-17(IEC60747-17)
– 5000-VRMS (WSOP16, WSOP8), 3750-VRMS (SMP8)Isolation Rating per UL 1577
– CQC Certification per GB 4943.1
– CSA, TUV, and CB Certifications
Applications
• Industrial Automation
• Motor Control
• Solar Inverters
• Battery Charging and Management
Features
• Meet ISO11898 Standard
• Support CAN FD and Data Rates up to 5 Mbps
• Typical Loop Delay: 110 ns• 5-V Power Supply, 2.25-V to 5.5-V IO Interface
• Receiver Common-Mode Input Voltage: ±30 V
• Bus Fault Protection: ±42 V
• Up to 5-kV RMS Isolation Rating (WSOP)
• ±200-kV/μs typ Static CMTI, ±150-kV/μs typ DynamicCMTI
• Junction Temperatures from −40°C to 150°C
• SMP8 and Wide-SOP (WSOP8, WSOP16)
• BUS pin ESD Protection (between Bus pins andGNDB)
– ±15-kV IEC 61000-4-2 Contact Discharge
• Safety-Related Certifications:
– VDE Certification according to DIN VDE V 0884-17(IEC60747-17)
– 5000-VRMS (WSOP16, WSOP8), 3750-VRMS (SMP8)Isolation Rating per UL 1577
– CQC Certification per GB 4943.1
– CSA, TUV, and CB Certifications
Applications
• Industrial Automation
• Motor Control
• Solar Inverters
• Battery Charging and Management
