TPT1255/TPT1256(3PEAK思瑞浦)
- The TPT125x device is a CAN transceiver that meetsthe ISO11898 High-speed CAN (Controller Area Network)physical layer standard. The device is designed to be usedin CAN FD networks up to 5 Mbps, and to enhance timingmargin and higher data ra
- 咨询热线：19372204303
-
-
产品详情
-
联系我们
The TPT125x device is a CAN transceiver that meetsthe ISO11898 High-speed CAN (Controller Area Network)physical layer standard. The device is designed to be usedin CAN FD networks up to 5 Mbps, and to enhance timingmargin and higher data rates in long and high-loadingnetworks. As designed, the device features cross-wire,overvoltage, and loss of ground protection from −42 V to+42 V, overtemperature shutdown, and a −30 V to +30V common-mode range. The TPT1256 has a secondarypower supply input for I/O level shifting the input pinthresholds and RXD output level. The device comes witha silent mode which is also commonly referred to as listenonly mode, and it includes many protection features toenhance device and network robustness.The TPT125x is available in SOP-8 and DFN3X3-8Lpackages and characterized from –40°C to +125°C.
Features
• Meets the ISO 11898-2:2016 and SAE J2284-1 to SAEJ2284-5 Physical Layer Standards
• Supports CAN FD and Data Rating up to 5 Mbps
• Short Propagation Delay Times and Fast Loop Times
• 5-V Power Supply, I/O Voltage Range Supports 2.8-Vto 5.5-V MCU Interface
• Common-Mode Input Voltage: ±30 V
• Protection Feature:
– IEC 61000-4-2 ESD Protection up to ±15 kV
– Bus Fault Protection: ±42 V
– VCC and VIO (TPT1256 only) Under-voltageProtection
– TXD Dominant Time-out Function and BusDominant Time-out Function
– Thermal Shutdown Protection
• Available in SOP8 Package and Leadless DFN3X3Package
Applications
• All Devices Supporting Highly Loaded CAN Networks
• Field Industrial Automation, Sensors, and Drive Systems
• Building, Security Control Systems
• Energy Storage systems
• Telecom Base Station Status and Control
Features
• Meets the ISO 11898-2:2016 and SAE J2284-1 to SAEJ2284-5 Physical Layer Standards
• Supports CAN FD and Data Rating up to 5 Mbps
• Short Propagation Delay Times and Fast Loop Times
• 5-V Power Supply, I/O Voltage Range Supports 2.8-Vto 5.5-V MCU Interface
• Common-Mode Input Voltage: ±30 V
• Protection Feature:
– IEC 61000-4-2 ESD Protection up to ±15 kV
– Bus Fault Protection: ±42 V
– VCC and VIO (TPT1256 only) Under-voltageProtection
– TXD Dominant Time-out Function and BusDominant Time-out Function
– Thermal Shutdown Protection
• Available in SOP8 Package and Leadless DFN3X3Package
Applications
• All Devices Supporting Highly Loaded CAN Networks
• Field Industrial Automation, Sensors, and Drive Systems
• Building, Security Control Systems
• Energy Storage systems
• Telecom Base Station Status and Control
