TPC116S4/TPC112S4(3PEAK思瑞浦)
- The TPC116S4/TPC112S4 are pin-compatible 16- bit and 12-bit digital-to-analog converters. These products are four-channel, low-power, buffered voltage-out DACs, which are guaranteed monotonic by design. These devices use a precision externa
- 咨询热线：19372204303
-
-
产品详情
-
联系我们
The TPC116S4/TPC112S4 are pin-compatible 16- bit and 12-bit digital-to-analog converters. These products are four-channel, low-power, buffered voltage-out DACs, which are guaranteed monotonic by design. These devices use a precision external reference applied through the high-resistance input for rail-to-rail operation and low system power consumption. The TPC116S4/TPC112S4 accept a wide range of 2.7 V to 5.5 V supply voltage. The parts incorporate a power-on reset circuit to ensure that the DAC output powers up to 0 V and remains there until a valid write takes place. The TPC116S4/TPC112S4 on-chip precision output amplifiers allow rail-to-rail output swing to be achieved. For remote sensing applications, the output amplifier’s inverting input is available to the user. The TPC116S4/TPC112S4 use a versatile 3- wire serial interface that operate sat clock rating up to 30 MHz and are compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards. The TPC116S4/TPC112S4 are available in a small-sized 16-pin TSSOP package, all packages are specified over the -40°C to +125°C extended industrial temperature range.
Features
Quad, 16-/12-Bit Pin Compatible DACs
TPC116S4: 16 bits
TPC112S4: 12 bits
Low Power Consumption (800 μA typ)
Differential Nonlinearity: ±1 LSB (max)
Glitch Energy: 2 nV-s
Power-on Reset to Zero
Supply Range: 2.7 V to 5.5 V
Buffered Rail-to-rail Output Operation
Safe Power-on Reset (POR) to Zero DAC Output
Fast 30-MHz, 3-Wire, SPI/QSPI/MICROWIRECompatible Serial Interface
Schmitt-trigger Inputs for Direct OptocouplerInterface
SYNC Interrupt Facility
High-performance Drop-in Compatible withTLV5614
Available in TSSOP-16 Package
Applications
Gain and Offset Adjustment
Process Control and Servo Loops
Programmable Voltage and Current Sources
Programmable Attenuators
Automatic Test Equipment
Features
Quad, 16-/12-Bit Pin Compatible DACs
TPC116S4: 16 bits
TPC112S4: 12 bits
Low Power Consumption (800 μA typ)
Differential Nonlinearity: ±1 LSB (max)
Glitch Energy: 2 nV-s
Power-on Reset to Zero
Supply Range: 2.7 V to 5.5 V
Buffered Rail-to-rail Output Operation
Safe Power-on Reset (POR) to Zero DAC Output
Fast 30-MHz, 3-Wire, SPI/QSPI/MICROWIRECompatible Serial Interface
Schmitt-trigger Inputs for Direct OptocouplerInterface
SYNC Interrupt Facility
High-performance Drop-in Compatible withTLV5614
Available in TSSOP-16 Package
Applications
Gain and Offset Adjustment
Process Control and Servo Loops
Programmable Voltage and Current Sources
Programmable Attenuators
Automatic Test Equipment
