-
产品详情
-
联系我们
The TPM16050 is a high-voltage H-bridge driver dedicated for IR-CUT control in surveillance camera. It is optimized to control the IR-CUT with 20Ω impedance and 3.3V, 5V or 12V supply voltage. It can provide up-to 0.5-A drive current. TPM16050 can sustain max 17V supply voltage. It also supports an external 26.9Ω/2.5W resistor in serial of supply pin VM, in order to protect low-voltage loads such as IRCUT from voltage over-stress with 12V supply. Internal protection features such as overcurrent protection, short circuit protection undervoltage lockout and over temperature improve reliability of the whole system.
Features
⚫ 17-V H-bridge Driver
⚫ MOSFET On-resistance Rds(on) HS + LS 0.85 Ω
⚫ 0.5-A Max Output Current
⚫ Supports 3-V to 17-V Operating Supply Voltage
⚫ Support 3.3-V, 5-V PWM (IN1/IN2) interface
⚫ Protection
− Undervoltage Lockout (UVLO)
− Over-Current Protection (OCP)
− Thermal Shutdown (TSD)
⚫ Small Package Footprint
− SOT23-6 Package
Applications
⚫ Surveillance Cameras
⚫ E-Lock
⚫ Consumer devices
⚫ Toys
Features
⚫ 17-V H-bridge Driver
⚫ MOSFET On-resistance Rds(on) HS + LS 0.85 Ω
⚫ 0.5-A Max Output Current
⚫ Supports 3-V to 17-V Operating Supply Voltage
⚫ Support 3.3-V, 5-V PWM (IN1/IN2) interface
⚫ Protection
− Undervoltage Lockout (UVLO)
− Over-Current Protection (OCP)
− Thermal Shutdown (TSD)
⚫ Small Package Footprint
− SOT23-6 Package
Applications
⚫ Surveillance Cameras
⚫ E-Lock
⚫ Consumer devices
⚫ Toys